Supermicro Intel E5-2600v44U FatTwin^TM

FatTwin^TM 8-Node Rear I/O

Manufacturer Part Number:

Supermicro SYS-F618R2-RT+, Black Color
RoHS Compliant

Specifications:

Key Factor
Server Type: 4U Rackmount
CPU Socket: 2
Memory Dimm: 16 DDR4, up to 1TB
HDD Bay: 6x 2.5" Hot-swap SATA3
Expansion Slot: 1 PCI-E 3.0x16 low-profile (via riser card) and 1 Micro low-profile PCI-E 3.0x8

Onboard RAID Controller: Intel C612 controller for 6 SATA3 (6 Gbps) ports; RAID 0, 1, 5, 10
Power Supply: 4 x 1620W Redundant Platinum Level
Networking: 2 x 1GbE ports
 

Product SKUs SYS-F618R2-RT+ SuperServer F618R2-RT+ (Black)   Motherboard Super X10DRFR   Processor/Cache CPU Intel® Xeon® processor E5-2600 v4/v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) Cores / Cache Up to 18 Cores / Up to 45MB Cache System Bus QPI up to 9.6 GT/s Note ** Please contact your Supermicro sales representative for additional details.   System Memory Memory Capacity 16x 288-pin DDR4 DIMM sockets Up to 1TB ECC LRDIMM, 512GB ECC RDIMM Memory Type 2133/2400MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset Intel® C612 Express chipset SATA SATA3 (6Gbps) with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics ASPEED AST2400 BMC   Input / Output (per node) Serial ATA 8x SATA3 (6Gbps) ports 2x SATA3 powered ports that support SATA DOM LAN 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port USB 2x USB 3.0 ports VGA 1x VGA port Serial Port / Header 1x Fast UART 16550 port   Management Software SuperDoctor® 5 Watch Dog NMI IPMI 2.0 SMCBU and SMM Power Configurations ACPI / APM Power Management Power-on mode for AC power recovery

Chassis Form Factor 4U Rackmount Model CSE-F418BC-R1K62B   Dimensions Width 17.63" (448mm) Height 6.96" (177mm) Depth 29" (737mm) Weight Net Weight: 150 lbs (68.04 kg) Gross Weight: 200 lbs (90.71 kg) Available Colors Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED   Expansion Slots (per node) PCI-Express 1x PCI-E 3.0 x16 Low-profile 1x PCI-E 3.0 x8 (Micro LP) MicroLP Adapter Matrix (Networking options)   Drive Bays (per node) Hot-swap 6x 2.5" Hot-swap SATA3 HDD trays   Backplane 1x SAS/SATA backplane   System Cooling (per node) Fans 3x 4cm 14k RPM middle fans   Power Supply 1620W high-efficiency redundant power supply w/ PMBus AC Input 1000W Output @ 100-120V, 12-10A, 50-60Hz 1200W Output @ 120-140V, 12-10A, 50-60Hz 1620W Output @ 180-240V, 10.5-8A, 50-60Hz DC Output 1000W: +12V/84A; +5Vsb/4A 1200W: +12V/100A; +5Vsb/4A 1620W: +12V/150A; +5Vsb/4A Certification     Platinum Certified   [ Test Report ]   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)