Supermicro Intel E5-2600v4 Server System
1U DP SuperServer 1028U-TNRTP+ for Data Center Optimized
Due to the complexity of integration, this product is sold as completely assembled systems only (including but not limited to CPUs, memory, and HDDs). Please contact our sales rep for special requirements.
Mfg. Part Number:
Supermicro SYS-1028U-TNRTP+, black color.
RoHS Compliant
Key Factor
Server Type: 1U Rackmount
CPU Socket: 2
Memory Dimm: 24 DDR4, up to 1.5TB
HDD Bay: 8x 2.5" Hot-swap SATA3 or 8 SAS3 Drives via optional AOC, 2x NVMe ports
Expansion Slot: 2 PCI-E 3.0 x 16 (Full-Height, Half-Length) & 2 PCI-E 3.0 x8(LP 1 internal)
Power Supply: 750W Redudant Platinum Level high-efficiency power supply
Networking: 2 x 10Gb SFP+ ports
Specifications:
Product SKUs |
 |
SYS-1028U-TNRTP+ |
- SuperServer 1028U-TNRTP+ (Black)
|
|
Motherboard |
 |
Super X10DRU-i+ |
|
Processor/Cache |
 |
CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
 |
Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- 64GB, 32GB, 16GB, 8GB, 4GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
On-Board Devices |
 |
Chipset |
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Connectivity |
- 2x 10G SFP+ ports via AOC-URN2-I2XS
- Intel® 82599ES 10G SFP+
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics |
|
|
Input / Output |
 |
SATA |
|
SAS |
- 8x SAS3 ports support via optional Add-on Card
|
NVMe |
|
LAN |
- 2x 10G SFP+ ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 5x USB 3.0 ports
(2 rear, 2 front panel, 1 Type A)
|
Video |
|
Serial Port |
|
|
System BIOS |
 |
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
Management |
 |
Software |
- SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SUM and SSM
- Optional IPMI 1.5 / 2.0
|
Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
 |
 |
Chassis |
 |
Form Factor |
|
Model |
|
|
Dimensions and Weight |
 |
Height |
|
Width |
|
Depth |
|
Weight |
- Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
Available Color |
|
|
Front Panel |
 |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
Expansion Slots |
 |
PCI-Express |
- 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
|
Drive Bays |
 |
Hot-swap |
- 10x 2.5" Hot-swap drive bays
- Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports
- Optional 8x SAS3 ports via AOC
|
 |
|
System Cooling |
 |
Fans |
- 5x heavy duty fans with optimal fan speed control
- 3x additional fans optional
|
Air Shroud |
|
|
Power Supply |
 |
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input |
- 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12V |
- Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB |
|
Certification |
 Platinum Level
[ Test Report ] |
|
PC Health Monitoring |
 |
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
|
Operating Environment / Compliance |
 |
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
This product is not refundable due to manufacturer return policy. We only replace or repair defective product by RMA procedure.
This product is special order, which takes longer to process and cannot be returned.